Column Pipes

SIGNOR PIPE CORPORATION (SPC) are very different materials; they share numerous advantages common to plastic piping systems. Advantage includes ease of installation, corrosion resistance, low friction loss, initial cost & longevity.

Description

Advantage

SIGNET Column pipes are very different materials: they share numerous advantages common to plastic piping systems. Advantage include ease of installation, corrosion resistance, low friction loss, initial cost & longevity.

EASY INSTALLATION :

SIGNET Column pipes are light in weight (approximately one -half the weight of aluminum and one -sixth the weight of steel) reducing transportation, handling and installation cost. Column pipe have smooth, seamless interior walls. No special tools are required for cutting. Column pipe materials can be installed without using the solvent cementing technique.

FREEDOM FROM TOXICITY, ODORS & TASTES :

SIGNET Column pipes are non toxic, odorless and tasteless. PVC pipes have been listed by the national sanitation foundation for use with potable water.

MAXIMUM BENEFIT AT LOW COST :

SIGNET Column pipes are available in 3 meter length. Due to this required length of pipe can be installed on the basis of depth of availability of water.

BIAXIAL ORIENTATION FOR HIGH IMPACT STRENGTH :

The substantial increase in strength properties, which results from biaxial orientation is shown by the stress rupture regression Line in figure – a.

SIGNET column pipes are manufacturing by Bi-Axial technology during extrusion process to occupy high impact strength thereby any breakage in pipe is quite less is shown in figure – b.

HIGH TENSILE STRENGTH :

SIGNET Column pipes are having high tensile strength. Hence, they do not reform even under deep installation. Therefore life of pipe increases.

THICK & THIN :

SIGNET Column pipes are manufactured with thick & thin technique to ensure the strength of pipe even at thread end too. Pipes end & barrel have specific thickness which improves the strength of pipes and same time save material consumption and thereby are cost effective.

LOW FRICTION LOSS :

The smooth interior surfaces of SIGNET column pipes assure low friction loss and high flow rate. Additionally, since SIGNET column pipe will not rust, pit, scale or corrode, the high flow rate will be maintained for the life of piping system.

LOW THERMAL CONDUCTIVITY :

SIGNET Column pipes are having much lower thermal conductivity factor than metal pipe. Therefore, fluids being piped ma-intain a more constant temperature.

CORROSION FREE EXTERNAL & INTERNAL :

With many other pipe materials, slight corrosion may occur. The corroded particles can contaminate the pipe fluid, complicating further processing or causing bad tastes, odors or discoloration. This is particularly undesirable when the piped fluid is for domestic consumption. with SIGNET column pipes there are no corrosive by products, therefore no contamination of the pipe fluid.

Installation Care

Clean pipe thread with pure water. Do not use oil / grease on thread.
Use pump guard / bottom adaptor (male thread) with pump and tight adequately using chain wrench.
Fit male thread pipe immediately after pump guard / bottom adaptor and then male-female pipe joint for required length.
Apply pipe clamp at each joint for lowering pipe.
Use top adaptor after complete installation.

Reviews

There are no reviews yet.

Be the first to review “Column Pipes”

Your email address will not be published. Required fields are marked *